4 Replacement Procedures
Installing the MDC Modem
The following describes the procedure for installing an MDC modem (See Figure 4-5).
1. Connect the MDC cable to the connector JP1 on the MDC modem.
2. Set the MDC modem on the slot and connect the MDC modem to the connector
PJ3020 on the system board by pressing it from the top.
3. Fix the MDC modem using the following screws.
4. Install the MDC slot cover and secure it with the supplied screw.
4-14
M2x4Z
BIND screw
x2
Satellite A50/TECRA A2 Maintenance Manual (960-478)
4.4 MDC Modem