Toshiba Tecra A2-S316 Maintenance Manual page 187

3.29 SETUP
6. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LED+AnalogRGB
NOTE: You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external CRT display which does not support SVGA mode is connected
and "LED+AnalogRGB" is selected, the external display is not displayed.
(b) TV Type
This option allows you to select the type of TV.
NTSC (Japan)
NTSC (US)
PAL
3-77
Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
Selects both the internal LCD and the external CRT for
simultaneous display.
TV in Japanese system
TV in the U.S. system
TV in Europe system
Satellite A50/TECRA A2 Maintenance Manual (960 -478)
3 Test and Diagnostics