4 Replacement Procedures
3. Remove the following screws holding the keyboard.
4. Remove the following screw fixing the keyboard hold plate and remove the
keyboard hold plate by pulling it to the right side.
5. Lift the upper side of the keyboard out and bring it a little to the display. Then turn it
face down on the palm rest.
4-26
M2.5 2.8B
THIN BIND screw
M2.5 2.8B
THIN BIND screw
Figure 4-18 Removing Keyboard
x2
x1
M2.5x2.8B THIN BIND
Satellite A50/TECRA A2 Maintenance Manual (960-478)
4.8 Keyboard
Keyboard Hold Plate