Kenmore Side by side refrigerator Use And Care Manual page 9

ALLOWING COOLING TiME BEFORE USE
To ensure reliable food storage, allow your refrigerator and freezer to operate with the doors closed for 8 to 12 hours
before placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the
factory.
SETTING COOLING TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at
the top of the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer
and fresh food compartments. The 2 gauges located on the front of the refrigerator just above the Ice and Water
Dispenser also give you the current temperatures for the freezer and fresh food compartments.
To adjust the temperature to a higher or lower setting, press the Up (Cold) or Down (Colder) button closest to the
display. The first time you press the button, the display shows current setting you entered. Each press of the button
after that changes the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature.
Cold
/N
Freezer Refrigerator
Off
CoNer Mode
(Temperature Display - Features may vary.)
(Gauges will operate in Fahrenheit only)
CHOOSING FAHRENHEIT OR CENTIGRADE
Depending on which temperature standard you prefer
to use, you can set your control panel to display in
Fahrenheit or centigrade. To change between Fahrenheit
and centigrade, press the Mode button (located between
the two digital temperature displays).
CoN CoN
........ Freezer Refrigerator
I
Press to alternate between
Fahrenheit and Centigrade