Kenmore Side by side refrigerator Use And Care Manual page 5

ThisOwner's Guide provides specific o perating
instructions foryourmodel. U setherefrigerator onlyas
instructed i nthis Use&CareManual. Beforestarting
the refrigerator, f ollowtheseimportantfirst steps.
LOCATION
• Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an adapter
plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that is
level and strong enough to support a fully loaded
refrigerator.
Consider water supply availability for models
equipped with an automatic ice maker.
INSTALLATION
TOE GRILLE INSTALLATION / REMOVAL
1 Open both doors and remove the toe grille by
unscrewing its two mounting screws and gently
pulling forward (see illustration).
2 Replace the toe grille by fitting it into place and
refastening its mounting screws.
Unscrew
_ Mounting
Screws
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
DOOR OPENING
Your refrigerator should be positioned to allow easy
access to a counter when removing food. For best use of
drawers and freezer baskets, the refrigerator should be in
a position where both the refrigerator and freezer doors
can be fully opened.
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator is equipped with adjustable
front rollers to help level your unit. To ensure proper door
seal and assist door closing, the refrigerator should be
tilted 1/4" (6 mm), front to back.
To Level Your Refrigerator:
1 Remove toe grille.
2 Use flat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.
Raise
3 Check both doors to be sure seals touch cabinet on
all four sides.