Dataprobe iBoot-G2 Manual page 17

set autoping mode <single |
and | or>
set autoping action <none | on-
latch | on-follow | off-latch | off-
follow | cycle>
set autoping cycle <0-999>
set autoping wait <1-999>
User Commands
set user account <yes | no>
set login required <yes | no>
set password <user | admin>
<old> <new> <repeat>
Event Commands
get events
set time enable <yes | no>
set time server <dotted
decimal>
get time
set event <1-8> <run | hold>
V130108E
Sets single AutoPing (AutoPing 1) or two AutoPing
relationship And or Or.
This command is used to set the action that the iBoot-G2 will
perform when the autoping triggers.
This command sets the maximum number of power cycles
when the AutoPing triggers. 0 = Unlimited
This command sets the time, in seconds for the device to
respond to a ping.
These commands are only available to the administrator.
This command sets whether or not a user account is used. If
<n> only the administrator account is active
This command sets whether or not a login is required for user
level operation. A login is always required for admin
functions.
This command is used to set the password of either the user
or administrator.
These commands are only available to the
administrator.
This command displays all scheduled events as shown below. Example:
Date Time Repeats
1. 01/13/2013 16:00 every
2. 01/13/2013 16:15 every
3. 01/15/2013 17:00 every
4. 02/16/2014 12:00 every
5. 02/16/2014 12:10 every
6. 02/17/2013 01:05 every
7. 02/18/2013 01:00 every
8. 03/18/2014 01:00 every
This command enables or disables the use of the time server
and scheduled events.
Note: When Adding new events through the CLI. Set this to
no to prevent unintended power switching
This command is used to set the IP Address of a network
time server.
Displays the current time and time server
Current Time: 16:10:41 01/27/2010
Server: 64.90.182.55
This command is used to all the event to run, or put the event
on hold
iBoot-G2
Action
1 Day(s) On Run
0 Day(s) On Run
1 Hour(s) Cycle Run
1 Day(s) Off Run
1 Day(s) On Run
0 Day(s) On Run
0 Day(s) On Run
0 Day(s) On Run
Single
None
1
2
n
y
user
admin
No
69.90.182.55
run
Page 17