FIELD REPLACEABLE UNIT DOCUMENTATION
KEYBOARD REMOVAL
Keyboard
CN7
7. Set the keyboard as shown above..
8. Disconnect the keyboard cable from PJ123 on
the system board.
9. Lift out the keyboard.
SWITCH BOARD REMOVAL
M2.5x4 black flat head screws
1. Remove two M2.5x4 black flat head screws securing
the sensor switch board.
2. Disconnect the switch board cable from PJ2027
on the back side of the switch board.
3. Lift out the switch board.
Satellite
A20 Series
Keyboard cable
switch
board
Switch board cable
TOSHIBA
Tough Enough for Today's World.
TM
MEMORY MODULE REMOVAL
Plastic
insulator
Memory clips
1. Lift up the plastic insulator covering the memory
slot.
2. Spread the memory clips outward and pull the
memory module out of the connector on a 30
degree angle.
WIRELESS LAN CARD REMOVAL
Wireless
LAN card
Black
coax
cable
White coax cable
1. Lift up the plastic insulator covering the wireless
LAN card.
2. Disconnect the black and white coax from the
wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
30 degree angle.
Memory module
Mini-PCI connector clips