Dell E5500 - Latitude - Core 2 Duo 2.53 GHz Service Manual page 50

13. Replace the hard drive (see
14. Replace the bottom of the base assembly (see
15. Follow the procedures in After Working on Your
Removing the E5500 Palm Rest
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the bottom of the base assembly (see
3. Remove the hard drive (see
4. Remove the WLAN card (see
5. Remove the hinge cover (see
6. Remove the keyboard (see
7. Remove the display assembly (see
8. Remove the optical drive (see
9. Remove the nine M2.5 x 8-mm screws from the bottom of the computer.
NOTE: The screw locations may vary slightly on your computer.
1 M2.5 x 8-mm screws (9)
10. Remove the two M2.5 x 5-mm screws on the top of the computer securing the metal plate.
11. Remove the three M2 x 3-mm screws that secure the top of the computer near the display.
Replacing the Hard Drive).
Replacing the E5400 Bottom of the Base
Computer.
Computer.
Removing the E5400 Bottom of the Base
Removing the Hard Drive).
Removing a WLAN Card).
Removing the Hinge Cover).
Removing the Keyboard).
Removing the E5500 Display
Removing the Optical Drive).
Assembly).
Assembly).
Assembly).