5. Remove the display bezel (see
6. Remove the display inverter (see
7. Remove the display panel (see
8. Disconnect the display cable from the connector on the back of the display panel.
1 display panel 2 display cable connector
3 display cable
Replacing the E5500 Display Cable
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE:
This procedure assumes that you have completed the removal procedure first.
1. Connect the display cable to the connector on the back of the display panel.
2. Replace the display panel (see
3. Replace the display inverter (see
4. Replace the display bezel (see
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the hinge cover (see
8. Close the display and turn the computer over.
9. Replace the bottom of the base assembly (see
10. Follow the procedures in
After Working on Your
Back to Contents Page
Removing the E5500 Display
Bezel).
Removing the E5500 Display
Removing the E5500 Display
Panel).
Replacing the E5500 Display
Panel).
Replacing the E5500 Display
Replacing the E5500 Display
Bezel).
Replacing the E5500 Display
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing the E5500 Bottom of the Base
Computer.
Inverter).
Inverter).
Assembly).
Assembly).