Dell E5500 - Latitude - Core 2 Duo 2.53 GHz Service Manual page 25

1 M2.5 x 8-mm screws (4) 2 M2 x 3-mm screws (2)
3 hinge
Replacing the E5500 Display Hinges
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: This procedure assumes that you have completed the removal procedure first.
1. Replace the four M2.5 x 8-mm screws (two per side) and the two M2 x 3-mm screws (one per side) that secure the display hinges to the display cover.
NOTE: The display hinge panels are labeled L (left) and R (right).
2. Replace the display bezel (see
3. Replace the display assembly (see
4. Replace the keyboard (see
5. Replace the hinge cover (see
6. Close the display and turn the computer over.
7. Replace the bottom of the base assembly (see
8. Follow the procedures in After Working on Your
E5500 Display Inverter
Removing the E5500 Display Inverter
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the hinge cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the M2.5 x 5-mm screw from the display inverter.
7. Disconnect the two display inverter connectors.
Replacing the E5500 Display Bezel).
Replacing the E5500 Display
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the E5500 Bottom of the Base
Computer.
Computer.
Removing the Hinge Cover).
Removing the Keyboard).
Removing the E5500 Display
Removing the E5500 Display Bezel).
Assembly).
Assembly).
Assembly).