Dell E5500 - Latitude - Core 2 Duo 2.53 GHz Service Manual page 19

Replacing the E5400 Display Inverter
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: This procedure assumes that you have completed the removal procedure first.
1. Connect the two display inverter connectors to the display inverter.
2. Replace the M2.5 x 5-mm screw that secures the display inverter.
3. Replace the display bezel (see
4. Replace the display assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Close the display and turn the computer over.
8. Replace the bottom of the base assembly (see
9. Follow the procedures in After Working on Your
E5400 Display Panel
Removing the E5400 Display Panel
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your
2. Remove the hinge cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display inverter (see
7. Remove the eight M2 x 3-mm screws (four on each side of the display panel) from the display hinge panels.
1 M2 x 3-mm screws (8) (on display hinge panels) 2 display panel
3 top cover
Replacing the E5400 Display Bezel).
Replacing the E5400 Display
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing the E5400 Bottom of the Base
Computer.
Computer.
Removing the Hinge Cover).
Removing the Keyboard).
Removing the E5400 Display
Removing the E5400 Display Bezel).
Removing the E5400 Display
Assembly).
Assembly).
Assembly).
Inverter).