Lower Latch Assembly; Upper Latch Assembly - Maytag MGR6775ADB Service Manual

Disassembly Procedures
!
WARNING

Lower Latch Assembly

NOTE: Removal of range from installation position is
required.
1. Disconnect power before servicing.
2. Remove oven door, see "Oven Door(s)-Door Removal"
procedure.
3. Remove range from installation position, see "Move
and/or Replacing Range" procedure.
4. Remove maintop, see "Maintop Removal" procedure.
(Perform steps 1 – 6.)
5. Remove left side panel, see "Side Panel" procedure.
6. Disconnect and label wiring from door lock switch and
motor.
7. Remove screws securing latch assembly and slide
assembly from range.
8. Reverse procedure to reassemble.
©2004 Maytag Services
To avoid risk of electrical shock, personal injury, or death:
disconnect electrical and gas supply before servicing.
Upper Oven Door

Upper Latch Assembly

1. Disconnect power before servicing.
2. Remove oven door, see "Oven Door(s)-Door Removal"
procedure.
3. Remove maintop, see "Maintop Removal" procedure.
(Perform steps 1 – 6.)
4. Disconnect and label wiring from door lock switch and
motor.
5. Remove screws securing latch assembly and slide
assembly from range.
6. Reverse procedure to reassemble.
16023415 27