Electrical Requirements; Installing The Power Cord - Kenmore 580.74184 Owner's Manual

Room air conditioner
Table of Contents

Advertisement

Available languages

Available languages

OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVETHEPOWERSUPPLY
CORD
GROUNDPRONG.
ELECTRICAL GROUND IS REQUIRED ON
THIS APPLIANCE.
For 230/208 volt 60 Hz, AC only, 15A fused
and properly grounded electrical supply is
required. A time delay fuse or time delay circuit
breaker is recommended.
Use a dedicated
circuit, serving only this appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED
GROUNDING
METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply cord with a 3-prong grounding plug. To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code (ANSl/NFPA 70)
latest edition and all local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by a
qualified electrician.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
_3-prong
^
11_
I
grounding
_-prong
type wall
g[oundln L' I
receptacle
r
2 r°und
Power
N
prong
supply
cord
You can choose between two methods below according to your window stool shape and preference.
USING
SLIT "A"
Fasten the stopper using 2 screw holes, and lead
out the power cord through slit "A".
Power
USING SLIT "B"
Fasten the stopper using left screw hole, and rotate
properly to lead the power cord out through slit "B".
-4-

Advertisement

Chapters

Table of Contents
loading

Table of Contents