Cleaning The Feed Dogs 6 - Kenmore Sears 385.12216 Owner's Manual

SECTION Viii, CARE OF YOUR MACHINE
Replacing the Light Bulb
NOTE:
:_' Unplug the machine.
'_' Do not dismantle the machine other than as
explained in this section°
-_- Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight°
=_- C lean the outside of the machine with a soft cloth
and mild soap.
CAUTION: As the light bulb could be HOT, protect
your fingers when you handle it+
Unplug the machine and open the face cover. Push
the bulb up and turn it counterclockwise to remove_
Put in a new bulb by pushing it up and turning it
clockwise°
'l' +t I
f +
Cleaning the Feed Dogs
Unplug the machine,.
Remove presser foot and needle° Using a screw driver,
remove needle plate.
1
Use a lint brush to clean the feed dogs,
Replace needle plate.
62