Setting Spool Pin - Kenmore 385.12612090 Owner's Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Setting Spool Pin
t
Spool pin
The spool pm Js used for hotding the spool
of thread in order to feed thread to the
machine,
To use, pull up the spool pin. Push down
for storage.
Adjust the Presser Foot Lever
Normal up
poslT_on
High posiUor
position
ip
position
Presserfoot
lever
The Presser Foot Lever raises and lowers your
presser foot,
You can raise it about 1/4" higher than the normal
up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser
foot.
• Thread Cutter
You don't need a pair of scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches
before starting the next seam.