Monogram ZIRS36N LH Installation Instructions Manual page 18

ZUGSS Trim Kit
Unified Stainless Steel Grille Panel
Step 9
Install
Soffit
Vent Top
SlipDustGasket
Int0TrimOnOneEnd SlipSecondDust
GasketIntoTrim
• Separate the top and hinge side trim pieces bg
removing side screws. Discard top piece; retain
screws.
• Install one end piece to unified top piece with
2 original screws.
• Slip end of rubber dust gasket into end of top
unified piece and slide trim towards the centen
Engage the second piece of gasket and continue
sliding trim until even with opposite ends.
• Reinstall end pieces to case trims. Push top piece
up against soffit or to installation height. Tighten
screws on both sides.
• Whenever possible, place a level on the top trim.
Adjust side trims until entire grille frame is level.
\
Screws
Step 10
Mount
Unified
Grille Panel
• Mount the unified grille panel bg dropping into slots
on the outside case trim.
18