Kenmore Two-speed high efficiency spray rinse system automatic washer Owner's Manual And Installation Instructions page 24

SETWATER LEVEL CONTROL
_li'leiii,l'ei#_il "-I:-1I[,_ _4
This control gives you the flexibility to
save water when washing small loads.
Your washer lets you select a water
setting based on the size of your wash
load.
• The variable control lets you select a
water level anywhere from SMALL
LOAD to LARGE LOAD.
MEDIUM
LOAD
LOAD LOAD
_ESET
SET SOAK / PREWASH
TEMPERATURE CONTROL
If a Soak or Prewash cycle is desired, set
the PREWASH/SOAK TEMPERATURE
Control to the water temperature that
matches the type of fabrics and soils in
your load.
• Follow garment label instructions.
• Select COLD (colors that bleed, light
soils), WARM (bright colors, moderate to
light soils), or HOT (whites and pastels,
heavy or greasy soils) water.
WARM
COLD • HOT
G
• For normal loads, start with the
MEDIUM LOAD setting, Adjust up
or down depending on your load.
Clothes should move freely and roll
toward the agitator.
• To change to a higher water level
setting after the washer has started
to agitate, turn the knob to RESET, then
to the desired new setting.
24