Kenmore Two-speed high efficiency spray rinse system automatic washer Owner's Manual And Installation Instructions page 32

LOADING
Proper loading of your washer con-
tributes to proper cleaning and fabric
care and reduces machine noise.
• Drop items into washer loosely. Fill
to the top of the basket (top row of
holes). Do not wrap items around the
agitator. Items should move easily
through wash water for best cleaning
and wrinkle-free results, Items should
sink and reappear later.
• Load washer properly and select correct
water level setting. Overloading or
packing the machine, and selecting a
setting too small for the wash load can:
- cause poor cleaning
- increase wrinkling
- create excessive lint
- wear out items faster
(because of pilling)
• Load by the amount of space items
take up, not by their weight.
• Mix large and small items in each load.
Load evenly to maintain washer balance.
An off-balance load can make the washer
vibrate during spin.
• Use a higher water level setting to
reduce wrinkling with permanent press
clothes and some synthetic knits. These
items should have more room to move in
the water than heaw items (towels,
jeans),
• Reduce wash time by using a lower
water level setting. Loads with only a few
small items need less wash time.
LOADING SUGGESTIONS
For these suggested full-sized loads,
set the WATER LEVEL selector to the
highest water level setting.
SUPER CAPACITYPLUS WASHERS
Heavy Work
Clothes
4 jeans
4 workpants
4 workshirts
2 sweatshirts
2 sweatpants
Towels
10 bath towels
10 hand towels
14 wash ctoths
Mixed Load
3 sheets
(1 king, 2 twin)
4 pillowcases
3 shirts
3 blouses
9 T-shirts
9 shorts
10 handkerchiefs
32