Kenmore Two-speed high efficiency spray rinse system automatic washer Owner's Manual And Installation Instructions page 23

STARTING WASHER
STEP 1. Add measured detergent
directly into washer basket. Then place
a load of sorted clothes in the washer.
NOTES:
• Use less detergent when washing a small
load size.
• Do NOT use liquid fabric softeners. You
could stain your clothes, Use a fabric
softener sheet in the dryer instead,
STEP 2. (OPTIONAL STEP) If desired,
add measured liquid chlorine bleach to the
liquid bleach dispenser (see page 29).
STEP 3. Close washer lid.
STEP 4. Set WATER LEVEL Control O
based on the size of your wash load (see
page 24).
STEP 5. (OPTIONAL STEP) If desired, set
PREWASH / SOAK TEMPERATURE
Control _) (see page 24).
STEP 6. Set the WASH / RINSE
TEMPERATURE Control (_ (see page
25).
STEP 7. Set SPEEDS _) Control
according to the type of fabric in the
load (see page 25).
STEP 8. Push the Cvcle Selector
Control (Timer) knob" _ in and turn to the
right to desired setting (see page 26),
STEP 9. Pull the Cycle Selector Control
(Timer) knob out, The dial will rotate as the
cycle progresses. The knob will not rotate.
STOPPING/RESTARTING WASHER
• To stop the washer at any time, push the
Cycle Selector Control (Timer) knob in,
• Pull the knob out to restart.
WAILERLEVEL _H 1114_ WAMI I WNIE
lnmmR_lme,e
23