Table of Contents
Advertisement
Safety devices must not be removed or disabled. If this is unavoidable for
repairs, the safety devices must be refitted and re-enabled immediately af-
ter completing the repairs.
Work on the machine's electrical equipment must be performed by a qual-
ified electrician.
The connecting cable must have a plug with country-specific approval.
Only a qualified electrician is permitted to connect the plug to the power
cable.
Work on live parts and assemblies is prohibited. Exceptions are regulated
in DIN VDE 0105.
Only use original spare parts by the manufacturer. Incorrect or faulty spare
parts can impair safety and damage the machine.
2.2
Coloured bars highlight the safety instructions in the text.
Signal words indicate the severity of the risk:
• Danger: Certainty of serious or fatal injury.
• Warning: Risk of serious or fatal injury.
• Caution: Risk of moderate or minor injury.
• Attention: Risk of damage.
In case of dangers for persons, these symbols indicate the type of danger:
Symbols in the text
Examples for marking of safety instructions in the text:
Examples
6
Marking of safety instructions
General danger
Danger due to electric shock
Danger due to pointed objects
Danger due to crushing
DANGER
Type and source of danger
Consequences in case of failure to observe
Measures for preventing the danger
Warning notice where failure to observe will lead to
fatal or serious injury.
Safety instructions
Operating manual 512/532 Version 01.0 - 03/2013
Advertisement
Table of Contents
