Table of Contents
Advertisement
Operating manual
5. Use the lever (3) to open the hook feet appropriately.
6. Insert a button.
7. Tighten knurled screw (4).
8. Remove the button.
9. Adjust the hook feet appropriately by loosening the knurled screw (4)
4.9
Fig. 10: Button shank shaper
1
(1) - Button shank shaper
(2) - Pivot lever
The button clamp is optionally equipped with a button shank shaper (1).
Swivelling the button shank shaper in/out
1. Manually swivel the button shank shaper in or out with the button clamp
adjust shank height
1. Turn the adjusting screw (3):
Setting up the button shank shaper
The button shank shaper position can be adjusted to match various button
diameters.
1. Release the screw (4).
2. Adjust the button in Y direction.
3. Tighten screw (4).
Operating manual 512/532 Version 01.0 - 03/2013
and slightly moving the lever (3) so that the button is safely held.
Button shank shaper (optional)
raised using the swivel lever (2).
• clockwise = shank is longer
• anticlockwise = shank is shorter
4
3
(3) - Adjusting screw
(4) - Screw
1
2
21
Advertisement
Table of Contents
