Duerkopp Adler 512/532 Operating Manual page 37

Settings via software
3. Press the Ready button.
4. Press the +/- Program buttons and select a memory slot (U01 ~ U10).
Storing a sewing pattern from the USB stick on the controller:
value 1
1. Press the +/- Function buttons to set the value 1.
2. Press the Selection button and select the sewing pattern file
3. Press the Selection button to load the sewing pattern from the USB stick.
4. Press the Reset button 2x.
Storing a sewing pattern from the controller on the USB stick:
value 2
1. Press the +/- Function buttons to set the value 2.
2. Press the Selection button to memorize the sewing pattern on the USB
3. Press the Ready button to confirm storing.
4. Press the Reset button 2x.
Deleting a sewing pattern from the controller: value 3
1. Press the +/- Function buttons to set the value 3.
2. Press the Selection button.
3. Press the Reset button to confirm the deletion.
• The Function display shows "----".
Editing a sewing pattern/contour test: value 4
Operating manual 512/532 Version 01.0 - 03/2013
The LED in the button is lit; the Program display shows the parameter
number U01.
The Function display shows values from 1 to 4.
• 1: Load sewing pattern from USB stick.
• 2: Memorize sewing pattern on USB stick.
• 3. Delete sewing pattern on controller.
• 4. Edit sewing pattern.
(HSR2000.csv ~ HSR2099.csv).
The Function display shows the value ok; the controller beeps; the
sewing pattern is memorized.
stick (HSW2001.scv = U01 ~ HSW2010.scv = U10).
The Function display shows the value ok; the controller beeps; the
sewing pattern is memorized.
35