Electrical Connection; Connecting The Mains Supply Cable - Baumatic BHS320.55SS Instruction Manual

30cm 2 solid plate electric hob
Table of Contents

Advertisement

Electrical connection

YOUR
PERMANENT INSTALLATION.
o Cable type: H05 RRF 3 core x 1.5 mm²
marked).
o Before connecting the appliance, make sure that the supply
voltage marked on the rating plate corresponds with your mains
supply voltage.
o We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
o WARNING: THIS APPLIANCE MUST BE EARTHED.
o The hob must be wired into a 13A double pole switched fused
spur outlet, having 3 mm contact separation and placed in an
easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your hob is located in
its housing.
o The wiring in the mains lead is coloured as follows:
Brown
Blue
Green and yellow
o As the colours of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked "L"
(live), or coloured red.
HOB
IS
INTENDED
Live
Neutral
Earth
FOR
FITTED
(Type RR-F <HAR>
AND
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bhs320.5ss

Table of Contents