Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BHC609
Summary of Contents for Baumatic BHC609
- Page 1 BHC609 60 cm Front touch control ceramic hob avecf...
- Page 2 User Manual for your Baumatic BHC609 60 cm Front touch control 4 zone ceramic hob NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
15 - 21 Positioning Unpacking the appliance Installing the appliance 17 - 18 Electrical connection Connecting the mains supply cable 19 – 20 Replacing the mains supply cable My appliance isn’t working correctly 22 – 23 Baumatic Consumables Contact details... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made... - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the applianc e at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen,...
- Page 7 Please see the specific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 8: Specifications
Specifications Product dimensions Aperture dimensions Depth: 520 mm Depth: 485 mm Width: 590 mm Width: 560 mm Height: 46 mm Product specifications: o 1 x 2.30 kW zone (Ø 230 mm) o 1 x 1.80 kW zone (Ø 180 mm) o 2 x 1.20 kW zones (Ø... -
Page 9: Electrical Details
lectrical details Rated Voltage: 220-240 Vac 50-60 Hz Supply Connection: 30 A (double pole switched f used outlet w ith 3mm contact gap) Max Rated Inputs: 6.5 kW ains Supply Lead: 3 core x 6 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. -
Page 10: Control Panel Layout
ontrol panel layout On/Off button Cooking zone selection button (x 4 Cooking zone minus button (x 1 Cooking zone plus button (x 4) Cooking zone temperature display (x 4) sing the ceramic hob Before first use IMPORTANT: You should clean the ce ramic hob surface (see “... -
Page 11: Touch Controls
ouch controls o All operations are performed by m eans of the touch controls that can be found on the control panel. Each touch control has a visual display that corresponds to it. Every time you press a touch control, an acoustic signal will sound. Switching the hob on Press the ON/OFF button (1) The LED above the On/Off button will illuminate. -
Page 12: Switching The Hob Off
witching the hob off Once you hav e switched off all of the cooking zones, you should switch off the hob. Press the ON/OFF button (1). o It is possible to swi tch the hob off at any time by pressing the ON/OFF button (1). -
Page 13: Hob Guidelines
Especially if pointed or hard objects are allowed to fall on it with some force. o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN CRACKED. SHOULD CONTACT BAUMATIC CUSTOMER CARE DEPARTMEN T IMMEDIATELY. -
Page 14: Cleaning And Maintenance
Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from you r mains supply before commencing any cl eaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. -
Page 15: Using A Ceramic Hob Scraper
sing a ceramic hob scraper The following guidelines should be followed when using a ceramic hob craper (not supplied):- o The scraper should be placed on the ceramic surface at an angle. o Residues should be r emoved by sliding the blade carefully over the ceramic surface. -
Page 16: Positioning
When unpacking the appliance please check that the following items re contained within the packaging:- 1 Baumatic hob 1 Installation and instruction manual 1 Baumatic guaran tee card... -
Page 17: Installing The Appliance
nstalling the appliance o Cut a hole in the work top that corresponds with the relevant drawing shown above. o IMPORTANT: You must obs erve the ventilation requirements shown in the drawing above. - Page 18 o IMPORTANT: There are ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the work top, when you put th e hob into position (see drawing opposite). o NOTE: Your appliance comes fitted with a sealing strip already attached to the underside of the hob.
-
Page 19: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulat ions and in compliance with Baumatic’s structions. Before connecting the appliance, make sure that the supply voltage marked o n the rating plate corresponds with your mains supply oltage. - Page 20 o The cable connections must be in accordance with the diagram located on the bottom of the hob (see above). The links must also be positioned as indicated. o You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws. o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened and the links are in position.
-
Page 21: Replacing The Mains Supply Cable
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at the socket. o Open the terminal block on the underside of the hob. -
Page 22: My Appliance Isn't Working Correctly
My appliance isn’t working correctly o The cooking zones are not functioning or will not switch on. * It has been more than 1 minute since the appliance was switched You should switch the appliance back on again, using the ON/OFF button and then switch on a cooking zone. - Page 23 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
-
Page 24: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk... -
Page 25: Contact Details
United Kingdom Czech Republic Baumatic Ltd., Baumatic CR spol s.r.o. Baumatic Buildings, Lípovà 665 6 Bennet Road, 460 01 Liberec 4 Reading, Berkshire Czech Republic RG2 0QX United Kingdom +420 483 577 200 www.baumatic.cz Sales Telephone (0118) 933 6900 Slovakia Sales Fax Baumatic Slovakia, s.r.o.