Table of Contents
Advertisement
P
ositioning
The adjacent furniture must be able to withstand a
minimum
ambient temperature
during periods of use.
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600 mm worktop that is at least 38
mm thick.
The following minimum clearance distances must be
o
bserved:-
o 700 mm between the hob
horizontal surface above it.
o 50 mm clearance around the sides and front of the appliance.
o 50 mm clearan
wall behind it.
o If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge of a kitchen unit. There must
be a gap of at least 150 mm betwee
vertical surface of the kitchen unit.
U
npacking the appliance
When unpacking the appliance pleas
a
re contained within the packaging:
1 Baumatic hob
1 Installation and i
1 Guarantee card
4 Fixing screws
4 fixing bracket
s
1
Sealing strip
temperature
of the room it is located in,
surface and the underside of any
ce between the back of the hob surface and the
nstruction manual
rise
of
100°C
n the side of the hob and the
e check that the following items
above
the
14
Advertisement
Table of Contents
