Table of Contents
Advertisement
M
aintaining the solid plates
o If something is spilt onto the plate itself, then it can be remo
using a soft brush, plastic or nylon scourer and warm water.
o To keep the solid plates in good condition, you should put a little
olive oil onto a kitchen towel and rub it onto the surface of the
plate. Th
e next time the plate is used, it may produce a little
smoke.
o Alternatively you can use a hotplate conditioner; these products
can normally be found at larger supermarkets and hardware
stores. The manufactu
using these products.
o IMPORTANT: If the solid plates are not maintained
regularly w
may rust.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
v
ersion of the following.
o UK Regulations and S
Norm Replacements.
o Building Reg
Environment).
o Building Sta
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
rer's instructions should be followed when
ith olive oil or a hotplate conditioner, then they
afety Standards or their European
ulations (issued by the Department of the
ndards (issued by the Scottish Development
ved
13
Advertisement
Table of Contents
