Lightbulb; Stainless Steel Surfaces - GE JKP15 Owner's Manual

ww_.GEAppliance_com
Stainless Steel Surfaces (on some m odels)
Denotusea steel-wool pod," i t willscratch
thesurface.
To clean the stainless-steel surface, use a
hot, damp cloth with a mild detergent
suitable for stainless-steel surfaces. Use a
clean, hot, damp cloth to remove soap.
Dry with a dry, clean cloth.
If food soil remains, try a general
kitchen cleaner, such as Fantastik ®,
Simple Green*, or Formula 409 ° .
For hard-to-clean soil, use a standard
stainless-steel cleaner, such as Bon-Ami*
or Calneo e.
Apply cleaner with a damp sponge.
Use a clean, hot, damp cloth to remove
cleaner. Dry with a dry, clean cloth.
Always scrub lightly in the direction of
the grain.
After cleaning, use a stainless-steel
polish, such as Stainless Steel Magic*,
Revere Copper and Stainless Steel
Cleaner*, or WenolAll Purpose Metal
Polish °. Follow the product instructions
for deaning the stainless-steel surface.
Oven Lightbulb Io, some models)
NOTE: The glass cover ( onsome models) should
beremoved onlywhencokL Wearing l atexgloves
mayoffera bettergrip.
Before replacing the bulb, disconnect
electrical power to the oven at the main
fuse or circuit breaker panel. Let the bulb
cool completely before removing it. For
your safety, do not touch a hot bulb with a
damp cloth. If you do, the bulb will break.
tlmlOlfl_:
Turn the glass cover counterclockwise
l/4 turn until the tabs of the glass cover
clear the grooves of the socket. Remove
the bulb.
Toreplace:
Put in a new 40-wattappliance bulb. Place
the tabs of the glass cover in to the grooves
of the socket. Turn the glass cover
clockwise 1/4 turn.
NOTE'.
= A 40-watt a ppliance b ulbissmaller thana
standard 40-wett h ousehold bulb.
II Inctafl a ndtighten thecover c lockwise.
I Reconnect electrical powertotheoven.
• Forimproved lightinginside theoven, c lean
theglass cover f requently using a wetcloth.
This shneld bedone whentheovenis
completely cool.
21