Machine Numbers - Olivetti ECR 2300 Instructions Manual

Chang Changing the Cash Reg Chang ing the Cash Reg ing the Cash Register's Standar ing the Cash Reg
Chang Chang ing the Cash Reg
Proceed as follows if you wish to change any of the standard machine
settings indicated in the previous table:
1. Turn the PRG key to the PRG position.
2. Type the [number] of the machine condition (1-30 as indicated in
the table) that you wish to alter. Machine conditions 19, 20 and 26
are reserved and cannot be changed.
3. Type the [number] of the required setting.
4. Press the [Void] key.
5. Program another feature or exit the program mode by turning the
PRG key to the OFF position.
Example: Program the cash register so that the date is printed in the
MM/DD/YY format.
Type/Press:
[4] + [0] + [Void]
PLU Pr PLU Pr ogramming Dump Repor ogramming Dump Repor ogramming Dump Report t t t t
PLU Pr PLU Pr PLU Programming Dump Repor ogramming Dump Repor
If a large number of PLUs are created (bear in mind that up to 500
PLUs can be programmed), a separate receipt can be printed indicating
all the PLUs programmed. Their number, associated price, VAT rate
indicator (if applicable) and associated department are reported on this
receipt, which should be kept in a safe place for future reference.
Pr Pr Pr Pr Printing an inting an inting an inting an inting an All PLU Dump Repor All PLU Dump Report t t t t All PLU Dump Repor All PLU Dump Repor All PLU Dump Repor
Proceed as follows to print a PLU report:
1. Turn the PRG key to the PRG position.
2. Press the [PLU] key to print the list.
26
ister's Standar ister's Standard Settings ister's Standar d Settings d Settings d Settings
ister's Standar d Settings
3. Turn the PRG key to the OFF position to exit the program mode.
Shown below is an example PLU dump report.
PLU number
Time
Date
Machine number
Item price and
associated VAT
Consecutive
receipt number