4.3
MACHINE DISASSEMBLY -
REASSEMBLY
4.3.1
MACHINE CASE
Disassembly
•
Unplug the machine power cord from the electrical
wall outlet.
•
Loosen screw (1)
•
Push the case of the machine (2) in the direction of
the arrow (3).
•
Remove the case (2) by lifting it the direction of
arrow (4).
4.3.2
PRINTER UNIT
Disassembly
•
Remove the printer compartment cover (1).
•
Remove the machine case (2).
•
Disconnect connector (3).
•
Using a screwdriver, remove screw (4) that secures
the paper support (5) and remove this support.
•
Remove the printer (6) in the direction of the arrow
shown being careful to avoid damaging the
connection cables.
686770R
Fig. 4-5 Machine Case Disassembly/Reassembly
Fig. 4-6 Printer Unit Disassembly/Reassembly
Service Manual
Reassembly
•
Correctly position the case on the machine.
•
Push the case (1) in the direction of arrow (5).
• Tighten screw (1).
•
Plug the machine power cord into the electrical wall
outlet.
Reassembly
•
Correctly position the printer (6) as shown in the
figure.
•
Correctly position the paper support (5) and tighten
its related securing screw (4).
•
Reattach the connector (3).
•
Refit the case of the machine (2) and the printer
compartment cover (1).
4-3