Using The Cash Register In A Password Protected Mode; Machine Programming Report - Olivetti CMS 140 B euro Instructions Manual

Using the Cash Register in a Password Protected
Mode
Using the Password to Access the Program Mode
If a manager password was defined to protect unauthorized access to
the PRG mode, proceed as follows to enter the specific password so
that you can work normally in this mode:
1. Slide the control switch to the PRG position.
2. Type the specific 4-digit password.
3. Press the [Charge] key.
Using the Password to Access the Z Management
Mode
If a manager password was defined to protect unauthorized access to
the Z mode, proceed as follows to enter the specific password so that
you can work normally in this mode:
1. Slide the control switch to the Z position.
2. Type the specific 4-digit password.
3. Press the [Amt Tend/TOTAL] key.
NOTE: This procedure automatically prints a Z management report.
Remember that a Z management report resets all transaction
totals to zero.
22

Machine Programming Report

As you program the cash register's different features according to your
specific needs, the values that you define are printed on the paper tape.
It is suggested that you store this programming printout in a safe place
so that you can keep track of how your cash register is programmed.
Provided below is an example printout of how the cash register is
programmed according to the examples provided in the previous
sections.
Programmed percent
discount rate
Decimal point
position
PLU number
Department
number
Programmed
Euro exchange
rate
Date
Time
VAT 1 rate assigned
VAT 2 rate assigned
VAT 3 rate assigned
VAT 4 rate assigned
Multiple item sale to
Department 2
Item price with
associated VAT
PRG and Z mode
password