Olivetti ECR 2300 Instructions Manual page 26

Example: Set the time at 3:30 PM.
Type/Press:
[1530] + [Qty/Time]
NOTE: If you wish that the time just entered be printed and displayed
in the 24-hour format, type [220] and then press the [Void]
Key. More information on how to change the cash register's
basic programming is explained in the section Programming
System Options.
P P P P P er er er er ercent Discount (-%) cent Discount (-%) cent Discount (-%) cent Discount (-%) cent Discount (-%)
Setting this option automatically calculates the preset rate each time
the [-%/RA] key is pressed. The percentage rate can be discounted from
an individual item or from a sales transaction total.
Setting a Per er er er ercent Discount (-%) Ra Setting a P Setting a P cent Discount (-%) Ra cent Discount (-%) Rate te te te te cent Discount (-%) Ra
Setting a P Setting a P cent Discount (-%) Ra
Proceed as follows to define a standard discount rate:
1. Turn the PRG key to the PRG position.
2. Type the [numbers] representing the desired percentage rate. Up to
four digits ranging from 0 to 99.99 can be used, and you MUST
enter a total of four digits, two before and two after the desired
decimal place. For example, to enter 10%, type [1000], to enter
6.5% type [0650].
3. Press the [0] key followed by the [-%/RA] key to store the rate.
4. Program another feature or exit program mode by turning the PRG
key to the OFF position.
Example: Program a standard 10% discount rate.
Type/Press:
[1000] + [0] + [-%/RA]
P P P P P er er er er ercent Plus Ra cent Plus Ra cent Plus Ra te (+%) te (+%)
cent Plus Rate (+%) cent Plus Ra te (+%) te (+%)
Setting this option automatically calculates the preset add-on rate
each time the [+%/PO] key is pressed. This percentage rate can be
added to an individual item or to a transaction total.
Setting a Per er er er ercent Plus (+%) Ra Setting a P Setting a P Setting a P Setting a P cent Plus (+%) Rate te te te te cent Plus (+%) Ra cent Plus (+%) Ra cent Plus (+%) Ra
Proceed as follows to define a standard add-on rate:
1. Turn the PRG key to the PRG position.
2. Type the [numbers] representing the desired percentage rate. Up to
four digits ranging from 0 to 99.99 can be used, and you MUST
enter a total of four digits, two before and two after the desired
decimal place. For example, to enter 10%, type [1000], to enter
6.5% type [0650].
3. Press the [0] key followed by the [+%/PO] key to store the rate.
4. Program another feature or exit program mode by turning the PRG
key to the OFF position.
Example: Program a standard 3% add-on rate.
Type/Press:
[0300] + [0] + [+%/PO]
19