Specifying Settings In Utility Menu; General Procedure For Specifying Settings In Utility Menu; Memory Reception - Olivetti d-COLOR MF 2400 User Manual

Specifying Settings in UTILITY Menu

General Procedure for Specifying Settings in UTILITY
Menu
1
Press the + or , key to select [UTILITY], and then press the Select key.
2
Press the + or , key to select the desired menu, and then press the
Select key to display the selected menu.
d
3
To select a setting, press the +, ,, * or ) key.
To enter a setting, use the keypad to type in the number.
4
Press the Select key.
The setting is applied.
d

Memory Reception

Received faxes can be stored in the memory and printed at a specified time.
This is convenient, for example, when confidential documents are received.
Memory reception can be used with the following settings.
-
Start/end time settings: Not set
[MEMORY RX MODE] function is normally set to [ON]. To print a fax
saved in memory, set [MEMORY RX MODE] function to [OFF].
-
Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When [ON TIME] setting is set to 18:00 and [OFF TIME] set-
ting is set to 8:00
The machine is in memory reception mode from 18:00 to 8:00 and in
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
Example 2: When [ON TIME] setting is set to 12:00 and [OFF TIME] set-
ting is set to 12:00 (the start time and end time are the same)
[MEMORY RX MODE] function is normally set to [ON]; however, faxes
saved in memory are printed at 12:00.
2-28
Refer to the menu configuration on page 2-9 to display the
desired menu.
To cancel the settings, press the Back key.
Specifying Settings in UTILITY Menu