Olivetti d-COLOR MF 2400 User Manual page 27

[COMM.
SETTING]
UTILITY Menu
[TONE/ Settings
PULSE]
Select the dialing system. If this parameter is
not correctly set to the type of dialing system
used, faxes cannot be sent and received.
Select the correct setting after checking which
type of dialing system is used by your tele-
phone line.
d
[LINE Settings
MONITOR]
Select the volume of the monitoring sound of
the transmission signal.
d
[PSTN/ Settings
PBX]
Select either [PSTN] or [PBX], depending on
the environment being used.
- [PSTN]: Select this setting if there is no tele-
phone switchboard in the environment
being used.
- [PBX]: Select this setting if there is a tele-
phone switchboard in the environment
being used or if an internal phone system is
used. If [PBX] is selected, specify the out-
side line access number.
[TONE] / [PULSE]
If [PTT SETTING] in the [USER SETTING]
menu is set to [U.S.A], [CANADA] or
[NEW ZEALAND], the settings cannot be
changed.
[OFF] / [LOW] / [HIGH]
Even when [OFF] is selected, the
monitoring sound can be heard when
the On hook key is pressed.
[PSTN] / [PBX]
2-15