d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the Start key.
d
If the fax could not be sent (for example, because the line was
busy), the automatic redial function will try sending the transmis-
sion again. If the fax could not be sent with the automatic redial
function, a TX Result Report can be printed. For details, refer to
"TX RESULT REPORT" on page 7-4.
d
If you want to cancel a scanned document queued for transmis-
sion or a fax waiting to be redialed, select [CANCEL RESERV.]
from the menu. For details, refer to "Cancelling a Queued Trans-
mission" on page 3-25.
d
If memory is nearly full, scanning of the document is stopped and
a message appears, allowing you to select whether to start the
transmission or cancel that transmission job. If the selection is
made to cancel the job, the pages of the document that have
been scanned for that job are deleted. If the selection is made to
begin the transmission, transmission begins. After the scanned
pages have been sent, scanning of the document starts again.
3-4
Basic Fax Operation