Basic Fax Operation
This section contains basic information of fax transmission.
d
Documents with the following paper sizes can be faxed.
–
–
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be
automatically scanned.
d
Do not load original documents that are bound together, for example,
with paper clips or staples.
d
Do not load more than 35 sheets; otherwise an original document
misfeed or damage to the document or machine may occur.
d
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
d
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Fax key to enter Fax mode.
d
2
Make sure that there is no document on the original glass.
3-2
When using the original glass
Document size: A5/A4/Statement/Letter
When using the ADF
Width: 140 to 216 mm
Length: 148 to 500 mm
If the initial mode ([UTILITY] - [MACHINE SETTING] - [INITIAL
MODE]) is set to [FAX], this step can be skipped.
Basic Fax Operation