Olivetti d-COLOR MF 2400 User Manual page 57

–
Using the address book: Press the Addressbook key four times, and
then use the List function or Search function to search for the desired
destination. (For details, refer to "Using the List Function of the
Address Book" on page 3-11 or "Using the Search Function of the
Address Book" on page 3-12.) Then, press the Select key.
4
To add a destination, check that [ADD] is selected, and then press the
Select key. Repeat step 3 until all desired destinations are specified.
–
To finish specifying destinations, select [FINISH], and then press the
Select key.
–
To check the specified destinations, select [CHECK/EDIT]. After
checking the destinations, press the Back key.
–
To delete a destination, press the + or , key to select the destination
to be deleted after selecting [CHECK/EDIT] to check the destinations,
and then press the Stop/Reset key. When a message appears,
requesting confirmation to delete the destination, select [YES], and
then press the Select key to delete the destination. After the destina-
tion is deleted, press the Back key.
d
5
Press the Start key.
The document is scanned, and then the fax is sent.
d
d
Specifying Multiple Recipients
The Addressbook key can be used if [Can Use AddressBook] is
displayed.
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the Select key. If this is done, all selected
recipients are cleared.
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the Start key.
3-15