Table of Contents
Advertisement
SYSTEM OVERVIEW
The Procedure pages may be accessed at any time on the MFD by pressing the PROC Key. A menu is
initialized, and when a departure, approach, or arrival is selected, the appropriate Procedure Loading Page is
opened. Turning the FMS Knob does not scroll through the Procedure pages (note the single page icon in the
lower right corner).
Procedure Pages (PROC)
Departure Loading
Arrival Loading
Approach Loading
For some of these pages (Airport Information pages, XM Satellite pages, Procedure pages), the title of the page
may change while the page icon remains the same.
MFD SYSTEM PAGES
In the Auxiliary (AUX) Page Group, there are two system pages: System Setup (page 4 of 6) and System Status
(page 6 of 6). The System Setup Page allows management of various system parameters, while the System
Status Page displays the status of all G1000 system LRUs.
SYSTEM SETUP PAGE
G1000 system settings are managed from the System Setup Page. The following settings can be changed:
• Date/time
• Displayed navigation angle reference, temperature,
and position settings
• Airspace alerts
(see the Flight Management Section)
• Arrival alerts
(see the Flight Management Section)
• Audio alerts
32
Figure 1-30 Procedure Pages
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
• MFD Navigation Status Box fields
(see the Flight Management Section)
• CDI scaling for GPS navigation source
(see the Flight Instruments Section)
• COM channel spacing
(see the Audio Panel and CNS Section)
• Criteria for displaying nearest airports
(see the Flight Management Section)
190-00595-01 Rev. B
Advertisement
Table of Contents
