Garmin Beechcraft A36 Pilot's Manual page 79

FLIGHT INSTRUMENTS
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course to/from the waypoint. Press the CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
As the aircraft crosses the missed approach point (in approach mode), automatic approach waypoint
sequencing is suspended. 'SUSP' appears on the HSI (to the lower right of the aircraft symbol) in place of
'OBS' and the OBS Softkey label changes to SUSP.
68
SUSP Softkey Suspends
Waypoint Sequencing
Figure 2-31 Suspending Automatic Waypoint Sequencing
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
SUSP
Annunciation
190-00595-01 Rev. B