Table of Contents
Advertisement
3) Select the 'Weather' group.
4) Press the ENT Key. The cursor flashes on 'STRMSCP LTNG'.
5) Turn the large FMS Knob to select 'STRMSCP MODE'.
6) Turn the small FMS Knob to change between 'CELL' and 'STRIKE' options. When an item is selected, press the
ENT Key.
7) Press the FMS knob to return to the Navigation Map Page.
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn
(Figure 6-40). This is to ensure that the strike and/or cell positions are depicted accurately in relation to the
nose of the aircraft.
Manually clearing Stormscope data on the Navigation Map:
1) Press the MENU Key.
2) Select 'Clear Stormscope Lightning'.
3) Press the ENT Key.
190-00595-01 Rev. B
Figure 6-39 Navigation Map Page with Stormscope
Lightning Data
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
HAZARD AVOIDANCE
297
Advertisement
Table of Contents
