Maximum Values - Panasonic KX-TDA50 Pt Programming Manual

2.1 PT Programming
Programming
Number
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
2.1.2

Maximum Values

Throughout this manual, maximum entry values are shown for each programming item. When
maximum entry values for one or more of the supported PBX models differ, these differences are
listed within the programming item, as shown in the example below.
[351]
However, please note that extension number, slot and port entry values are not listed within each
programming item. These values vary depending on the model of PBX and the card type installed,
as shown below.
Extension Numbers (Including Feature Numbers)
• KX-TDA50/KX-TDA100/KX-TDA200: 1–4 digits
• KX-TDA600: 1–5 digits
KX-TDA50 Slot and Port Values
Available Slot Entry Values
Slot Number
01
14 PT Programming Manual
Programming Group Title
Timer Programming
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
Carrier Table No.
KX-TDA50: 01–10
ENTER
KX-TDA100: 01–10
KX-TDA200: 01–10
KX-TDA600: 01–48
Description
System timers
TRS and Automatic Route Selection
(ARS) programming
CO line and trunk group settings
Class of Service parameters
Extension feature settings
PBX interface and external device
settings
Station Message Detail Recording
(SMDR) and maintenance feature
settings
Used to display the cards currently
installed in the PBX, or to "delete" a card
from system programming before
physically removing it.
Trunk Group No.
SELECT
Disable/
KX-TDA50: 01–64
Enable
KX-TDA100: 01–64
KX-TDA200: 01–64
KX-TDA600: 01–96
These values vary by PBX model
Supported Cards
Pre-installed Super Hybrid Ports
END
ENTER