Table of Contents
Advertisement
Table 36 Network > Wireless LAN > More AP: Edit
LABEL
Edit
Back
Apply
Cancel
7.4 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS.
Click Network > Wireless LAN > WPS. The following screen displays.
Figure 57 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Generate
WPS Status
P-660HN-FxZ Series User's Guide
DESCRIPTION
Click this to go to the MAC Filter screen to configure MAC filter settings. See
Section 7.2.6 on page 114
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Select the check box to activate WPS on the ZyXEL Device.
This shows the PIN (Personal Identification Number) of the ZyXEL Device. Enter
this PIN in the configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a wireless
network using WPS or Enable WPS is selected and wireless or wireless security
settings have been changed. The current wireless and wireless security settings
also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless or wireless
security changes on the ZyXEL Device or you click Release_Configuration to
remove the configured wireless and wireless security settings.
Chapter 7 Wireless LAN
for more details.
117
Advertisement
Table of Contents
Troubleshooting
