Manual Configuration; Figure 14 Auto-Detection: Pppoe; Figure 15 Auto Detection: Failed - ZyXEL Communications P-660HN FxZ Series User Manual

Figure 14 Auto-Detection: PPPoE

3c The following screen appears if the ZyXEL device detects a connection but not the
connection type. Click Next and refer to
manually configure the ZyXEL Device for Internet access.

Figure 15 Auto Detection: Failed

4.2.1 Manual Configuration

1 If the ZyXEL Device fails to detect your DSL connection type but the physical line is
connected, enter your Internet access information in the wizard screen exactly as your
service provider gave it to you. Leave the defaults in any fields for which you were not
given information.
P-660HN-FxZ Series User's Guide
Chapter 4 Internet and Wireless Setup Wizard
Section 4.2.1 on page 55 on how to
55