Table 16 Manually Assign A Wep Key - ZyXEL Communications P-660HN FxZ Series User Manual

Chapter 4 Internet and Wireless Setup Wizard
The following table describes the labels in this screen.

Table 16 Manually Assign a WEP key

LABEL
Key
Back
Next
Exit
5 Click Apply to save your wireless LAN settings.
Figure 28 Wireless LAN Setup 3
6 Use the read-only summary table to check whether what you have configured is correct.
Click Finish to complete and save the wizard setup.
No wireless LAN settings display if you chose not to configure wireless LAN
settings.
64
DESCRIPTION
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters ("0-9", "A-F")
for a 64-bit or 128-bit WEP key respectively.
Click this to return to the previous screen without saving.
Click this to continue to the next wizard screen.
Click this to close the wizard screen without saving.
P-660HN-FxZ Series User's Guide