Control Panel Lock; Static Settings Upload; Reset; Whites Setting - Chauvet Colorado 1VW Tour User Manual

Control Panel Lock

Static Settings
Upload

Reset

Whites Setting

COLORado™ 1 VW Tour User Manual Rev. 01d
Continued from previous page
This setting allows the user to activate or disable the control panel lock, which keeps
non-authorized personnel from changing the fixture's settings.
1) Go to KEY.
2) Select On/ Off.
When the control panel lock is active, the fixture will prompt the user to enter the
password after 30 seconds of control panel inactivity or after turning on the
fixture.
After being prompted to enter the password:
1) Press <UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
This option allows the user to copy the static settings of one COLORado™ 1 VW Tour
fixture onto other COLORado™ 1 VW Tour fixtures by using the Master/Slave method.
1) Configure and connect the fixtures in a Master/Slave arrangement, where the
master unit has the custom programs you want to transfer onto the slave units.
2) At the master unit, go to SET > UPLD.
3) When prompted, enter the master access password as shown in Control Panel
Lock.
4) Wait for the upload process to finish before disconnecting the fixtures.
During and after the upload, the master and slave units will visually indicate the status of
the process, as follows:
Color Meaning
LEDs Off The upload process is running
Cool White The upload finished successfully
This setting allows the user to reset the COLORado™ 1 VW Tour fixture to its default
values, including the custom programs.
1) Go to SET> REST.
2) When prompted, enter the master access password as shown in Control Panel
Lock.
3) Wait for the reset process to finish.
This setting allows the user to edit the temperature of the six white macros used in the
macros channel. The six pre-set white macros are configurable.
1) Go to CAL1.
2) Select a white macro (WT.01~05).
3) Select a white range (Warm or Cool).
4) Select a white range value (0~255).
5) Repeat for the other white range.
6) Repeat for the other white macros (WT.01~05).
Operation
-11-