Dmx Control With Id Addressing; Static Mode; Master/Slave; Dimmer Curves - Chauvet Colorado 1VW Tour User Manual

Operation
DMX Control With ID
Addressing

Static Mode

Master/Slave

Dimmer Curves

-10-
Continued from previous page
In this mode, the fixtures with the same DMX starting address will respond to the DMX
controller based on the fixture's individual ID address setting. If the user selects ID
address "0", all the fixtures with the same DMX address will respond in unison.
Otherwise, each fixture will follow the control for its particular ID address.
1) Repeat steps 1, 2, and 3 from DMX Control Without ID Addressing.
2) Activate ID Addressing in each fixture:
a) Go to SET > ID.
b) Select ON.
3) Select an ID address for each fixture:
a) Go to ID.
b) Select an ID (01~66)
The Static mode allows for permanent white color mixing without a DMX controller.
1) Go to STAT.
2) Select the desired white range (Warm or Cool).
3) Select the desired white range value (0~255).
4) Repeat for the other white range.
5) Select Strob.
6) Select the desired frequency (0~20).
The Master/Slave mode allows a group of COLORado™ 1 VW Tour fixtures (the slaves)
to replicate what another COLORado™ 1 VW Tour fixture (the master) is doing, without
a DMX controller.
1) Set the Master Unit:
a) Set the running mode to DMX as explained in "DMX Control Without ID
Addressing".
b) Select a static setting as explained in "Static Mode".
2) Set the slave units:
a) Go to RUN.
b) Select SLAV.
•
The fixture that is set to run in STATIC mode automatically becomes the
Master.
•
Do not connect a DMX controller to the master or slave fixtures.
This setting determines how the output of the COLORado™ 1 VW Tour follows the
position of the Dimmer fader, as well as the Warm White and Cool White faders.
1) Go to SET.
2) Select Dim.
3) Select a dimmer curve (Off, Dim1, Dim2, Dim3, or Dim4).
Setting Description
OFF The output is proportional to the faders' position (linear)
Dim1 The output is not proportional (fastest)
Dim2 The output is not proportional (fast)
Dim3 The output is not proportional (slow)
Dim4 The output is not proportional (slowest)
Continues on the next page
COLORado™ 1 VW Tour User Manual Rev. 01d