Table of Contents
Advertisement
Available languages
Available languages
ElectricalShock Or Personal Injury
Hazard
Disconnect electricalsupply before
servicingor cleaning the unlL Failure
to do so could result In electricalshock
or personal Injuryfrom cleaner sod-
donly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let. Place the carpet/bare floor selector in
the carpet position and lower handle to lay
vacuum flat.
Inll
Latches
Slide latches
outward and
remove nozzle
cover
Nozzle
CAUTION
Do not use a bulb rated over 15W
(130V). During extended use, heat from
the bulb could overheat surrounding
plestJ¢parts.
Remove the
light bulb by
pushing the
bulb in while
turning coun-
terclockwise to
release from
the slot.Then
pull the light
bulb straight
out.
To replace
the light bulb
carefully
insert and
turn clockwise
to securely fit
into slot.
NOTE: See PARTS AND FEATURES for
bulb number.
n tCAUTION
I
plug in or tum on untilthe vacu-
completely reassembled.
Replace the
nozzle cover
and secure
the latches.
IJl
I
Latches
Nozzle
21
Advertisement
Table of Contents
