Download Table of Contents Print this page

Vacuum - Kenmore 116.35725 Owner's Manual

Hide thumbs Also See for 116.35725:

Advertisement

Table of Contents
Always follow all safety precautions when
cleaning and servicing the vacuum cleaner.
Elecldcal Shock Or Personal Injury
Hazard
Disconnectelectrical supplybefore
servicing or cleaning the unit. Failure
to do so could result in electrical shock
or personal Injuryfrom cleaner sud-
donly starting.
If the cleaner does not seem to have ade-
quate suction, first check if the dust bin is
full or if a filter is clogged. See DUST BIN
CLEANING
and FILTER CHANGING.
If the dust bin and filter areas are free of
clogs, check the hose area. Remove the
lower end of the stretch hose from the
cleaner by grasping the hose collar, twisting,
and pulling straight out.
Hose In
and Out
Plug in the
vacuum and
turn it on.
Stretch the
hose to max-
imum length
and then
allow the
hose to
return to its
storage
length.
Turn the unit off and unplug the unit.
Visually inspect the hose and the base area
into which the hose is inserted.
Remove any visible clog.
Re-insert the hose into the opening on the
lower body from which it was removed.
Press firmly to assure connection.
Hose
Hose
Collar
If the dust bin and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check this area, see the section on
BELT CHANGING
AND AGITATOR CLEAN-
ING.
Personal Injury Hazard
DO NOT place hands or feet under-
neath the unit at any time. The agitator
will be revoMng rapidlywhen the vacu-
um is turned on and is in the carpet
setting.
Return the cleaner to the upright position
before plugging into an electrical outlet.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.35726

Table of Contents