Vacuum - Kenmore 116.35725 Owner's Manual

TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is changed.
The agitator must be cleaned according to
the following schedule:
Vacuum Use ._
HEAVY every week
(used daily)
MODERATE
(used 2-3 times/week)
every month
LIGHT
(used I time/week)
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area.
AgitatorAssembly
Agitator
Unit
Remove any string or debris located on the
agitator assembly or agitator shaft.
TO REPLACE BELT
Make sure that the carpel/bare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft.
Motor
Shaft
Carpet/BareRoor
Be_ New SelectorShaft
Pufley Be_
BELT ROUTING
Correct Routing of Belt
(Selector In Carpet_on)
_tBe_lt _l , Carpet/Bare
;I__j_..Z.::.--_j: _;T._ Floor P_dal
Agitator J Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
_, Carpet/Bare
IJ )Floor Pedal
Agitator Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector in Bare Roor Position)
/ ",\ Carpet/Bare
i ,,,._} Floor Pedal
18