Other Features
7.6 Tracker Paging System
When installed with your system, the Tracker Paging System option
allows you to send call back and parked call messages to Tracker
pagers assigned to station extension numbers. Along with the parked
call message, the system parks the call in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alphanumeric or numeric-only) is dependent upon the Tracker pager
model in use at the station.
When outside callers call into a system that has both a Tracker Paging
option and a voice mail option installed, the system gives these callers
the option of either leaving a message or tracking the person that they
are calling.
• To enable a Tracker Pager at your station,
1. PRESS INTERCOM.
2. DIAL *06.
• To disable a Tracker Pager at your station,
1. PRESS INTERCOM.
2. DIAL #06.
• To send a call back message to someone's Tracker Pager
after receiving a ring no answer,
1. MAKE an intercom call to someone and receive no answer.
2. PRESS programmed TRACK button OR DIAL #01.
3. After your station returns to idle* hang up handset or press
SPEAKER to end. The Tracker Pager system will transmit your
station extension number to called party's Tracker Pager dis-
play. (Some models will also display your station name if the
system is programmed to include station names.)
* If the Tracker paging system does not accept your actions, an error tone will sound
at your telephone.
72
Comdial
GCA70-281
August, 03