Local Conference; Network Conference - Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
The SIP-T20P IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conference.
To set up a local conference call:
1. Place a call to the first party.
2. Press
The active call is placed on hold.
3. Enter the number of second party and press
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press
(for example, select the call on account 1).
3. Press
You can press
split the conference call into two individual calls. To drop the conference call,
press .
You can use network conference feature on the SIP-T20P IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

To use this feature, contact your system administrator for the network conference-URI in
advance, and configure the phone via web user interface:
1. Click on Account->Advanced>>.
2. Select the desired conference type from the pull-down list of Conference Type.
62
to create a new call.
Dial: 1234
again to join all parties in the conference.
or to select the call for conference and make sure the call is active
to join the two calls in the conference on account 1.
to place the conference on hold. You can press the CONF key to
or
123
.